Classic Deluxe Pontoon Console | 3D Builder Package

Classic Deluxe Pontoon Console | 3D Builder Package

Upgrade your pontoon boat console. Match our Classic DeckMate® seats perfectly and personalize your helm with our Helm Package options. Store your boating items in the easily-accessible side storage unit or larger items in the door-accessible storage.

• Factory-Grade Electronic & Steering Parts
• No wood! All of our pontoon furniture frames are plastic. We use rotationally molded plastic bases.
• High-grade stainless steel hardware and staples are used on our pontoon consoles, along with t-nuts, which are inserted into the plastic bases to secure each pontoon seat cushion.
• Gauge and switch panels are not pre-installed.

Carbon Fiber Package Includes:

• Deluxe Console Base & Windshield
• Carbon Fiber Accent Panels
• Carbon Fiber Deluxe Comfort Wheel
• 8 Switch Panel with fully wired Switches, USB, and Circuit Breakers
• Gauge Panel with fully wired Tach, GPS Speedo, Depth Sounder, Volt Meter
  
• Wiring Harness Included! Details here

Burl Wood Package Includes:

• Deluxe Console Base & Windshield
  
• Burl Wood Accent Panels
• Burl Wood Deluxe Comfort Wheel
• 8 Switch Panel with fully wired Switches, USB, and Circuit Breakers
• Gauge Panel with fully wired Tach, GPS Speedo, Depth Sounder, Volt Meter
  
• Wiring Harness Included! Details here

Black Steering Wheel Package Includes:

• Deluxe Console Base & Windshield
• Black Steering Wheel
• No switch or gauge panels included
• Wiring Harness Included! Details here

Want to customize your console further? Shop our Pontoon Boat Consoles Parts Collection.

Dimensions: 

Console

36" Overall Width 

34" Overall Height 

28" Depth (without side storage )   48" total depth with side storage

Side Door opening:  16" wide by 19" tall

Steering wheel height: 48" (centered)

Side storage

5" overall width

16" overall height 

25" depth 

Instructions

1. Take the 1/4-20 Stud Bolts and insert them in the T-Nut inserts located on the underside of the Large Helm Top. NOTE: Make sure you do not twist the stud bolts more than 2 - 3 full rotations.
2. Place the top of the console on the base where the indent fits into the slots.
3. From the inside of the console, use the four (4) washers and four (4) wing nuts given to fasten the Large Helm Top to the Large Helm Base.
4. Once the Helm Top and the Helm Base are tightened, place the access door on with the three (3) Black Knobs to secure the door to the base.

Gauge Panel Instructions

Download Assembly PDF